Floor Care Product Range

We aim to deliver the highest quality cleaning and maintenance products to help keep your hard floor surfaces sparklingly clean and in prime condition.

Amtico Starter Kit Floor Cleaning Products

Amtico FloorCare Starter Kit

Amtico flooring looks visually stunning, to ensure it stays in good condition this is a cleaning kit that has every eventuality covered. Keep your floor maintained, and protected and eliminate scuff marks and dirt with this ultimate floor kit.

Amtico’s FloorCare Starter Kit is suitable for use on most vinyl, rubber and linoleum flooring. A great value starter kit for regular maintenance of Amtico floors, especially when used in combination with Amtico’s FloorCare Floor Dressing.

Each pack contains:

  • 1 x 1L Amtico Flooring Maintainer: A specially formulated, concentrated cleaner, with a citrus fragrance, for routine cleaning. Anti-bacterial formula
  • 1 x 500ml Amtico Flooring Anti-Bacterial Spillage Remover: Ready-to-use, citrus-scented cleaner, effective removal of spillages.
  • 1 x Pack Amtico Protective Felt Pads: Assorted felt pads in various sizes to protect Amtico flooring when applied to the base of furniture legs. Use as supplied, or cut to size.
  • 1 x Red Non-Abrasive Nylon Pad: This pad removes stubborn scuff marks and dirt from the floor.
  • Amtico Wear and Care information booklet.

A British market leader, Amtico prides itself on creating designer flooring that is not only beautiful but flexible, durable and sustainable. With over 50 years of experience, Amtico stands for British excellence built on a base of expert knowledge, inspiring possibilities while guaranteeing high-performing flooring. 

Amtico FloorCare Maintainer

Specially formulated for spot cleaning and regular maintenance of your Amtico floor, giving professional-level results, which also leaves a pleasant scent.

  • Available in 1 ltr and 5 ltr capacity
  • Use it daily to wash your Amtico floor
  • Excellent coverage
  • A must to maintain your Amtico Flooring guarantee

Amtico FloorCare Stripper

To keep your floors in great condition, this dressing remover should be used now and again to strip the of layers of dressing.

  • One bottle will strip approximately 50m² – dilute according to instructions, then apply, rinse and dry before applying a coat of Amtico’s Dressing.
  • Available in 1 ltr and 5 ltr capacity

Amtico FloorCare Dressing

Protect your floors against scuffs and scratches with this specially formulated floor dressing.

One bottle will cover approximately 25m². Dries in under an hour (after applying two coats) to a satin finish.

  • Available in 1 ltr and 5 ltr capacity
  • Creates a Satin Finish to protect against scratches marks and fine scratches
  • Simplifies routine clean
  • Easy to use
  • Excellent coverage
  • A must-use to obtain Amtico Guarantee

Amtico’s FloorCare Spillage Remover is suitable for use on most vinyl, rubber, and linoleum floors.

  • Target spills with this anti-bacterial cleaner. Safe to use in food preparation areas, Amtico’s Spillage Remover kills 99.999% of bacteria.
  • Formulated for the convenient removal of spillages and other deposits, with a fresh citrus aroma.
  • Ideal for spot cleaning.

Instructions:

  • Shake before use.
  • Spray directly onto the affected surface, wipe away using a clean cloth or paper towel and allow to dry.
  • More persistent stains may require a second application.
  • Maintain floor with Amtico’s FloorCare Floor Maintainer.
Karndean FloorCare Starter Kit - Floor Cleaning Products

Karndean Refresh Range

Karndean Refresh is a non-soluble polish that creates a satin finish that helps to protect your floor from marks and fine scratches.

  • Available in 750ml, 2ltr and 5 ltr capacity

Direction For Use:

  • Make sure the floor is completely dry and free from all traces of Karndean Remove.
  • Use the blue applicator from your Karndean Floor Care Kit with the Karndean Refresh Pad (soft/white).
  • Spread a thin and even layer of undiluted Karndean Refresh directly onto the floor in one direction, using the blue applicator.
  • Wait 30 minutes for the layer to dry.
    Repeat the process in the opposite direction.
  • Allow the floor to dry for approximately 6 hours (or overnight) before allowing foot traffic.
  • To maintain the protective layer, the refresher floor protector will need to be stripped and reapplied every 6 months depending on traffic.

Coverage: 1 litres = approx coverage of 20m2

A must-use to obtain Karndean Guarantee.

Karndean Remove Range

Karndean Remove assists in removing films and contaminants or prepares your floor before applying Karndean Refresh. Be sure to have both solutions before using Karndean Remove.
Note: Karndean Remove can be used without Karndean Refresh to remove films.

  • Available in 750ml, 2ltr and 5 ltr capacity.

Direction For Use:

  • With a soft sweeping brush, remove any loose dirt or dust. If you use a vacuum, be sure to switch to the hard floor setting or disable the beater bar first.
  • Always wear protective gloves when using Karndean Remove.
  • Dilute 1-part Karndean Remove in 5 parts clean water.
  • Liberally spread the solution onto the floor with a mop.
  • Allow the solution to work for five minutes. Be sure not to let it dry.
  • Use the blue applicator from your Karndean Floor Care Kit with a wet Karndean Remove Pad (coarse/white) and scrub the floor.
  • Using clean warm water, mop the floor thoroughly to remove residue.
  • Be sure the floor is free of any traces of Karndean Remove (otherwise the floor may have a streaky appearance).

Karndean Clean Range

Karndean Clean is a water-soluble everyday cleaner for your Karndean floor and adds extra protection between deep cleans.

  • Routine Cleaner cleans the surface without damaging the protective layer
  • Suitable for Commercial and Residential Floor Cleaning.
  • Available in 750ml, 2ltr and 5 ltr capacity.
  • Coverage for Karndean Clean in a 2ltr container (67.6 fl.oz) is approximately 500m2 (5,380 square feet) when diluted according to label instructions.

Direction For Use:

  • Make sure the floor is completely dry and free from all traces of Karndean Remove.
  • With a soft sweeping brush, remove any loose dirt or dust. If you use a vacuum, be sure to switch to the hard floor setting or disable the beater bar first.
  • Add 1.6 fl.oz. of Karndean Clean (1 notch on the bottle) to approximately 2 gallons of water -or- 1.5 Tablespoons of Karndean Clean to 1 gallon of water.
  • Mop the Karndean Clean solution onto the whole floor.
  • Mop any excess liquid and allow the floor to dry before walking on it.

The advice and guidance provided above are for general information only and Carpet City Ltd. bears no responsibility or liability.
If in doubt always contact the manufacturer for product maintenance instructions.

Get in touch with us today

Ready for any project, our team of experts and fitters is here to help!

Get A Callback

Please fill in and send your contact details so we can get back to you.